PVC Ceiling Sheet Wall Panel Making Manufacturing Machine / Extrusion Production Line
PVC ceiling wall panel production line is mainly used to produce PVC ceiling, PVC wall panel with width of 300mm,600mm with
different section shape and height. The surface of PVC ceiling can be treated by double color printing and coated with glossy oil, or
by heat transfer printing, or by lamination, which can make marble, wooden design on the surface of products.this plastic wall panels equipment include:extruder,mould,vaccum calibration table,haul off machine,cutter machine and stacker.
PVC Ceiling panel material is based on polyvinyl chloride resin, adding a certain amount of anti-aging agents, modifiers and other additives, through mixing, calendering, vacuum blister and other processes.This kind of PVC ceiling panel condole top applies to the condole top adornment of kitchen, toilet especially, have quality light, prevent moisture, heat insulation heat preservation, not easy combustion, do not absorb dust, easy cleanness, can besmear act the role ofing, easy installation, price is low advantage
Main Features of Ceiling Sheet Wall Panel Machine:
(1)speed controlled by inverter, saving power and easy to adjust speed
(2)extruder temperature controlled by Omron intelligent controller, temperature fluctuation self adjusting
(3)low power consumption: lowest total production line consumption 25kw/hour
(4)economical price, suitable for large scale investment.
(5)with Infrared tracking device, benefit for product shape control, suitable benefit for seamless edge PVC ceiling panel
Flow chart of PVC Profile extrusion line
PVC powder+other addictive→mixing material by mixer→powder feeder→conical double-screw extruder→Die&mould→stainless steel vacuum calibration platform→ hauls-off machine→cutter→stacker
| Model |
YF120 |
YF180 |
YF240 |
YF300 |
YF600 |
| Product Max size |
120X50mm |
180x50mm |
240x100mm |
300x120mm |
550x120mm |
| Extruder |
SJSZ45/90 |
SJSZ51/105 |
SJSZ65/132 |
SJSZ65/132 |
SJSZ80/156 |
| Capacity |
120KG/hr |
150kg/hr |
300kg/hr |
300kg/hr |
400kg/hr |
| Production length |
18m |
20m |
24m |
24m |
28m |
DoubleScrew Extruder.
1.1 Simens Touch Screen and PLC
1.2 Spiral Structure of Barrel
1.3 Special Design of Screw
1.4 Air Cooled Ceramic Heater
1.5 High Quality Gearbox
Based on 33:1 L/D ratio for screw design, we have developed 38:1 L/D ratio. Compared with 33:1 ratio, 38:1 ratio has advantage of 100% plasticization, increase output capacity by 30%, reduce power consumption up to 30% and reach almost linear extrusion
performance.
Extrusion Die Head.
2.1 Moving Device of Die Head
2.2 Die Head Rotary Device
2.3 Heat Exhausting Device
2.4 Cooling Device for Core
Extrusion die head apply spiral structure, each material flow channel is placed evenly. Each channel is after heat treatment and mirror polishing to ensure material flow smoothly. Die head structure is compact and also provide stable pressure, always from 19 to 20Mpa. Under this pressure, pipe quality is good and very little effect on the output capacity. Can produce single layer or
multi-layer pipe.
Profile cooling platform
3.1 Strong Cooling for Calibrator
3.2 Better Support for Profile(Wall Panel)
3.3 Silencer
3.4 Pressure Relief Valve
Profile cooling platform is used to shape and cool profile, so as to reach standard pipe size. We use double-chamber structure. First chamber is
in short length, to ensure very strong cooling . As calibrator is placed in the front of first chamber and profile shape is formed mainly by calibrator, this design can ensure quick and better forming and cooling of profile.
Haul off unit.
5.1 Pipe Clamping Device
5.2 Water Tank Filter
5.3 Quality Spray Nozzle
5.4 Pipe Support Adjusting Device
5.5 Pipe Support Device
Haul off unit provides sufficient traction force to pull pipe stably. According to different pipe sizes and thickness, our company will customize traction speed, number of claws, effective traction length. To ensure match pipe extrusion speed and forming speed, also avoid deformation of pipe during traction.
| Laminating machine |
Cutter.
|
Features of PVC Ceiling Wall Panel Extrusion Line:
- Fetching in Europe and America advanced technology and uniting with domestic condition, our company develop this production line.
- Easy and convenient for operation and maintain
- Economical price, suitable for large scale investment.
- This production line is used to manufacture PVC wall panel with width normally from 250mm to 300mm with different section shape and height.
- The surface of PVC ceiling / wall panel can be treated by hot stamping printing or lamination machine, which can make marble, wooden design on surface of PVC ceiling or PVC wall panel.
| Main Products (Click Text) |
Zhangjiagang City Qiangsheng Plastic Machinery Co.,Ltd.
Zhangjiagang City Qiangsheng Plastic Machinery Co.,Ltd.is located in Jingfeng town Sanxing Industry park, Zhangjiagang City.
Its main products:double-screw extruder, single-screw extruder, sets of extruding production lines and auxiliary equipment, such as, PE, PP, PVC, PP-R plastic pipe production line,plastic profile production line, plastic granutating line, plastic recycling line and others.
Descriptionct Description
Q1:What about the payment terms?
A1:Always 30% down payment as deposit,70% balance pay before shipping.
Q2:What about the payment way?
A2:TT,L/C at sight or Made in China trade assurance.
Q3:If you will send engineer coming to our factory to install and test the machines?
A3:Yes,Every set of machine we will send professional engineer to your factory and help installation and test the machines for you.
Q4:If you have CE,SGS,ISO certificate?
A4:Yes,except these,if you also need other certificates,we also can help to apply.
Q5:If we buy your machines, can you offer us wear-out spare pats?
A5:Yes,We provide our high quality machine 1 years' guarantee,and we will also offer you 1 years wear-out spare parts for free. Once your machines broken or doesn't work within 1 years and you can't solve it, firstly, we will try to help you to find problems from your words description by phone or other communication tools. Secondly, if the phone solutions still not work, our engineers will go to your factory to solve it. Meanwhile, they will teach you the related experiences for fixing.
Q6:What is the voltage?
A6 380V 50hz 3 phase or any other voltage according to client's requirement.
){kind=link}